Using the HP DTC Manager/UX

Conﬁguring TCP parameters

Configuring TCP parameters

The Conﬁgure TCP Parameters screen is used to specify TCP timing information

for different LAN and extended LAN conﬁgurations.

1 Use the TAB key to move to a set field. Place an x or X to choose the set. The

timer values are defined by the set of values that you choose (see “The five sets

of TCP values” on page 73).

• Set 1—(the HP Default setting) for traffic over the LAN only.

• Set 2—for traffic over a LAN with bridges.

• Set 3—for traffic over a LAN with exceptionally high transmission times.

• Set 4—for networks with high data losses.

• Set 5—for extended switching applications over a LAN, or a LAN with

bridges.

2 Press the Done (F4) function key to return to the Rear Panel Configuration

screen.

tsta195:root:/opt/dtcmgr/sbin

DTC Conﬁguration Main Menu

Highlight an item and then press “Return” or “Select Item” (F4).

Add DTC Conﬁguration ..

Modify DTC Conﬁguration ....

Delete DTC Conﬁguration ...

Modify Default Parameters ->

Help for Using DTCconﬁg

Help

Shell

Select

Item

tsta195:root

Exit

DTCconf

DTC NameClick here, or press F1 for online help

Rear Panel Configuration

Action Menu (F5)

Configure TCP Parameters

Board = C or L