Using the HP DTC Manager/UX

73
Configuring TCP parameters
7
3 The TCP parameters cannot be modified dynamically. Exit from dtcconfig and
download the changes to the DTC by executing the following command at the
shell prompt:
dtcreset dtcname
TCP Parameters Configuration screen
The five sets of TCP values
TCP Parameter Set 1 Set 2 Set 3 Set 4 Set 5
Maximum data retransmission timer 20 100 200 200 50
Minimum data retransmission timer 1 3 5 5 1
Stand-alone acknowledgement timer 4 4 4 0 0
Connection assurance timer 3000 3000 3000 3000 3000
Window probe timer 1200 1200 1200 600 1200
Number of retries for data 4 6 6 10 6
tsta195:root:/opt/dtcmgr/sbin
TCP Parameters Configuration
Mark with an “x” the set of TCP parameters to configure.
Help
tsta195:root
Exit
Window
wally LAN board
Done
Then press “Return” or “Done” (F4).
Default
Values
Maximum Data Retransission Timer (in tenths of seconds)
Minimum Data Retransmission Timer (in tenths of seconds)
Stand-Alone ACK Timer (in tenths of seconds)
Connection Assurance Timer (in tenths of seconds)
Window Probe Timer (in tenths of seconds)
Number of Retries for Data
Set 5
Set 4Set 3Set 2Set 1
20
1
4
3000
1200
4
x