Using the HP DTC Manager/UX

Conﬁguring DNS/IP parameters

Configuring DNS/IP parameters

Use the DNS/IP Parameters Conﬁguration to specify:

• the IP addresses for the DNS (Domain Name System) server

• the IP routing parameters

The DTC sends a DNS request to the DNS server whose IP address is speciﬁed. The

DNS server returns the IP address of the requested system. If you specify the IP

address of a system with the DTC connect command, DNS is not used.

The IP address format is xxx.xxx.xxx.xxx where xxx is a decimal number from 0

through 255. The IP address can be 0.0.0.0 but cannot be 255.255.255.255. The IP

address is unique on the network. An IP router allows connections to nodes on

different LAN networks. If an IP router is not deﬁned, then connections cannot be

made to systems outside the local subnet.

tsta195:root:/opt/dtcmgr/sbin

DTC Conﬁguration Main Menu

Highlight an item and then press “Return” or “Select Item” (F4).

Add DTC Conﬁguration ..

Modify DTC Conﬁguration ....

Delete DTC Conﬁguration ...

Modify Default Parameters ->

Help for Using DTCconﬁg

Help

Shell

Select

Item

tsta195:root

Exit

DTCconf

DTC NameClick here, or press F1 for online help

Rear Panel Configuration

Action Menu (F5)

Configure DNS/IP Parameters

Board = C or L