Using the HP DTC Manager/UX

75
Configuring DNS/IP parameters
7
DNS/IP Parameters Configuration screen
Enter the appropriate values in the provided fields and press the Perform Task (F4)
function key when you have finished. You are returned to the Rear Panel
Configuration screen.
DNS parameter definitions
Default Server
Address
Enter the IP address of the default server you want to use. A DNS server resolves
system names to IP addresses for the entire network. For example, if you are at a
terminal, you can enter the DTC connect command with a system name instead of
an IP address:
DTC> connect host1.hp.com
Backup Server
Address
Enter the IP address of the DNS server to be used if the default DNS server is not
available.
Default Local
Domain
Enter the default local domain that you want to use. The DTC uses the specified
local domain name to complete the Domain node name when necessary. If a
terminal user enters a node name without a period, the DTC will complete the node
name with the default local domain name. For example, if the Default Local
Domain is hp.com and a terminal user enters:
DTC> connect host1
the DTC will try to connect to host1.hp.com.
tsta195:root:/opt/dtcmgr/sbin
DNS/IP Parameters Configuration
tsta195:root
Exit
Window
Select
Fill in or modify the desired fields and then press “Perform Task” (F4).
Domain Name Service:
IP Routing:
Default Server Address
Backup Server Address
Default Local Domain
Default IP Router Address
Backup IP Router Address
Subnet Mask. . . . . . . . . . . . . . . .
15.128.128.93
15.128.128.50
mysys.mycorp
. . . . . . . .
. . . . . . . .
. . . . . . . .
15.128.128.53
15.128.128.45
255.255.248.000
Action
. . . . .
. . . . .
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
Help