Using the HP DTC Manager/UX

81
Configuring SNMP MIB data
7
SNMP/MIB Data Configuration screen
SNMP parameter definitions
Contact Name
Enter up to 255 ASCII characters. Contact the SNMP manager of your network to
find the name of the contact person to enter for this DTC. This optional field can
include information on how to contact the person as well as a name.
Sys Name Enter up to 255 ASCII characters if you want to use this optional field. Contact the
SNMP manager of your network to find the system name you should enter here.
This name will be used to identify the DTC as an SNMP node and is by convention
the same as the DTC node name.
Sys Location Enter up to 255 ASCII characters to specify the physical location of the DTC. This
is an optional field.
SNMP Enable
Authentication Traps
Set this optional field to Disabled or Enabled. Enabled means that the SNMP
process agent of the DTC can generate authentication failure traps.
Trap Destination IP
Address
Enter the IP addresses (non-broadcast) that designate the SNMP network
management stations on the network to which the DTC will send SNMP traps. If no
trap destination IP addresses are entered, the DTC will not generate any SNMP
traps.
tsta195:root:/opt/dtcmgr/sbin
SNMP/MIB Data Configuration
tsta195:root
Exit
Task
Perform
Fill in or modify the desired fields and then press “Perform Task” (F4).
MIB II System Group Objects:
HP-UX MIB Trap Destination (optional):
Contact Name . . . . . . .
Sys Name. . . . . . . . . . . . . . . . . . . . . . .
Sys Location . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
001.001.001.001 002.002.002.002
003.003.003.003
(optional)
(optional)
(optional)
SNMP Enable Authentication Traps . .
Trap Destination IP Addresses . .
Joe User__________________
anydtc____________________
site 1_____________________
004.004.004.004 005.005.005.005 006.006.006.006
Help
Shell
Default
Values
Enabled
wally LAN board