DHCPv6 2.002/.003 Release Notes

Documentation
DHCPv6 2.002/.003 provides documentation discussed in the following sections.
Product Documentation
For more information on configuring, installing, and administering DHCPv6 2.002/.003,
refer to the HP-UX IP Address and Client Management Administrator's Guide at
http://www.docs.hp.com/hpux/netcom/index.html#Internet%20Services.
Manpages
Table 1-1 describes the DHCPv6 2.002/.003 manpages.
Table 1-1 DHCPv6 2.002/.003 Manpages
DescriptionName
Describes dhcpv6d, the DHCPv6 server daemon.
dhcpv6d(1M)
Describes dhcpv6db2conf, a utility that converts the client database,
dhcpv6client.data into a set of standard configuration variables.
dhcpv6db2conf(1M)
Describes dhcpv6client_ui, an interface through which a user contacts
the client daemon to obtain IPv6 addresses and other configuration
parameters from the server.
dhcpv6client_ui(1M)
Describes dhcpv6clientd, the client daemon that obtains configuration
parameters from DHCPv6 servers to configure a host.
dhcpv6clientd(1M)
Defects Fixed in This Release
Table 1-2 lists the defects fixed in DHCPv6 2.002/.003 on both the HP-UX 11i v1 and
HP-UX 11i v2 operating systems.
Table 1-2 Defects Fixed in both HP-UX 11i v1 and HP-UX 11i v2 Operating Systems
DescriptionIdentifier
The DHCPv6 server drops the packet when it receives messages from a
relay agent in which the /etc/dhcpv6tab file is not configured properly.
JAGag33319
While acting as a relay agent, dhcpv6d(1M) removes the DNS, NIS, SIP, and
AUTH options from the packet.
JAGag33317
When a client sends a SOLICIT message with the IA option to the
dhcpv6d(1M)server, dhcpv6d(1M) sends an ADVERTISE message without the
IA option to the client.
JAGaf96889
The /sbin/dhcpv6config script, which is called by the startup script
/sbin/init.d/dhcpv6client, fails with a syntax error.
JAGaf59332
Enhance DHCPv6 to comply with RFC 3315.JAGaf26897
14 DHCPv6 Release Notes