FTAM/9000 Reference Manual

60 Chapter 2
HP vendor_codes
inout_dcb->result.vendor_code
MESSAGE FTV306_CANNOT_DECODE_DDN
CAUSE The FTAM library cannot decode the directory
distinguished name to a struct Dir_dn.
ACTION Check the log file for logged error messages and
recovery actions. If necessary, refer to the OSI
Troubleshooting Guide.
MESSAGE FTV307_INCOMPATIBLE_STACK
CAUSE Your application was linked with a version of
libmapftam.a which is not compatible with the
underlying OSI network software (or “stack”).
ACTION Re-link the application with the version of libmapftam.a
on the system experiencing the error.
MESSAGE FTV308_STACK_NOT_INITIALIZED
CAUSE The underlying OSI network software (or “stack”) has
not been started.
ACTION Start the underlying OSI network software.
MESSAGE FTV401_ERROR_IN_GROUP_CAUSED_STATE_FAILURE
CAUSE After making a grouped request, one of the requests
within the threshold set for the group failed; therefore,
the regime did not change.
ACTION Check the action_result, state_result, and diagnostic in
the inout_dcb to determine which request failed and
why. If the error still occurs, collect relevant error
information and contact your HP support
representative.