HP Fibre Channel Mass Storage Adapters Support Guide FibrChanl-02 (fclp) Driver, September 2009

target 14 0/2/0/0/0/0.108.11.255.0.0 tgt CLAIMED DEVICE
ctl 2 0/2/0/0/0/0.108.11.255.0.0.0 sctl CLAIMED DEVICE HP MSA CONTROLLER
HP Support Tools Manager
This section describes how to use HP Support Tools Manager (STM) to gather information about
the Fibre Channel adapters, diagnose problems, and update firmware.
STM runs in three modes:
• Menu Mode
Use the mstm command to start STM in Menu Mode.
• X Windows environment
Use the xstm & command to start STM in X Windows.
• Command Line Mode
Use the cstm command to start STM in Command Line Mode.
Three tools are available in STM for Fibre Channel Mass Storage adapters:
• Information Tool
The Information Tool provides information about a Fibre Channel adapter without resetting
the adapter. The following is an example information log:
Log creation time: Tue Jun 6 14:12:23 2000
Hardware path: 8/12
Product ID: Fibre Channel Interface
Hardware Path: 8/12
Module Type: Type-A DMA I/O
Hardware Model: 0x15
Hardware Revision Number: 0
Software Revision Number: 0
Software Model Number: 0xa7
Software Option: 0x80
Hard Physical Address: 0xffb4c000
Slot Number: 3
IODC Revision: 0
World Wide Name: 1000080009F64883
Date Code: 3822
• Logtool Utility
The Logtool Utility extracts log errors and enables you to view them. This tool provides
information about a Fibre Channel adapter without resetting the adapter. The following is
an example utility log:
Log creation time: Mon Sep 11 17:47:07 2000
Device Path : 8/12
Product ID: Fibre Channel Interface
Product Qualifier: 15
Logger: td
Device Type: Interface
Device Qualifier: Fibre
-----------------------------------------------------------
Severity Level: Error
1Bolt Value: 88417
Error 17: The Fibre Channel Driver received a LINK DOWN interrupt.
Additional Information:
Frame Manager Status Register = 0x1
HP Support Tools Manager 21