Migrating X.25 over PSI to XOL

Figure 4 illustrates the network configuration with X.25 over PSI.

Figure 5 illustrates the network configuration after migration to XOL.

Figure 4. X.25 setup with PSI Figure 5. X.25 setup with LLC2

Cards:

The HP-UX X.25 PSI card (Part numbers J2792A, J2794A, J2815A, J3525A, or J3526A) is replaced

with a supported LAN card. The supported LAN cards are Fast Ethernet cards and Gigabit Ethernet

cards.

For more information on Ethernet cards, see the Ethernet Adapters and Related Software Solutions

webpage at:

http://www.hp.com/products1/serverconnectivity/adapters/index

Cables:

The X.25 cable used with the X.25 PSI card is replaced with a LAN cable, which is compatible with

the LAN adapter used. The LAN cable is connected to the LAN network either through a LAN switch

or a LAN hub.