WU-FTPD 2.6.1 Release Notes (5900-2465, September 2012)

This command reverts the system to the base version of FTPD (WU-FTPD 2.4) that is delivered with
the core HP-UX 11i v1 operating system.
If you wish to upgrade your operating system and if the Web upgrade version of WU-FTPD is
enabled on the existing operating system, you must revert to the previous version of WU-FTPD using
the enable_inet -r wuftpd command before upgrading the operating system.
If you want to reinstall the Web upgrade, which is already enabled on the operating system, revert
to the previous version of WU-FTPD using the enable_inet -r wuftpd command, before
reinstalling the Web upgrade.
Verifying the WU-FTPD 2.6.1 installation
To verify whether the WU-FTPD 2.6.1 depot is installed successfully on your system, enter the
following command at the HP-UX prompt:
# swlist -l bundle | grep bundle_name
If WU-FTPD 2.6.1 is installed properly, the following output is displayed:
• On an HP-UX 11i v1 operating system
WU-FTP-261 B.11.11.01.014 WU-FTPD-2.6.1 special release upgrade
• On an HP-UX 11i v2 operating system
ftp-ssl-ncf B.11.23.01.002 ftp-ssl-ncf web release
• On an HP-UX 11i v3 operating system
HPUX-FTPServer C.2.6.1.8.0 HPUX FTP Server
Known problems and limitations
WU-FTPD 2.6.1 does not have any known problems and limitations.
Related information
The following sections discuss the documentation available for WU-FTPD 2.6.1.
Manpages
Table 4 describes the manpages distributed with the WU-FTPD 2.6.1 depot.
Table 4 WU-FTPD 2.6.1 Manpages
DescriptionManpage
User interface to the file transfer programftp(1)
Server for the Defense Advanced Research Project Agency (DARPA)
Internet file transfer protocol.
ftpd(1M)
Utility to verify the path names of the FTP configuration filesckconfig(1)
Command to remove all the shutdown message files from the real,
anonymous, and virtual user accounts
ftprestart(1)
Command that shows the current process information for each user
logged into the FTP server
ftpwho(1)
Command that shows the current number of users (and the limit) for
each class defined in the /etc/ftpd/ftpaccess file
ftpcount(1)
Command that provides an automated shutdown procedure that a
superuser can use to notify FTP users when the FTP server is shutting
down
ftpshut(1)
Utility used to add, delete, and list enhanced access group information
in the group access file (/etc/ftpd/ftpgroups)
privatepw(1)
32 WU-FTPD 2.6.1 Release Notes