WU-FTPD 2.6.1 release notes (July 2010)

in the /usr/contrib/wuftpd/save_custom/backup directory and enables the
higher version of WU-FTPD by linking the new files to existing file locations.
The enable_inet -r wuftpd command enables you to revert to the previous version
of WU-FTPD. To enable the newer version of WU-FTPD, you must run the
enable_inet wuftpd command on the HP-UX prompt. The enable_inet status
wuftpd command displays the currently active version of WU-FTPD.
If you want to install a general release (GR) patch, you must disable WU-FTPD 2.6.1
by running the following command at the HP-UX prompt before installing the GR
patch in an HP-UX 11i v1 system:
/usr/bin/enable_inet -r wuftpd
This command reverts the system to the base version of FTPD (WU-FTPD 2.4) that is
delivered with the core HP-UX 11i v1 operating system.
If you wish to upgrade your operating system and if the Web upgrade version of
WU-FTPD is enabled on the existing operating system, you must revert to the previous
version of WU-FTPD using the enable_inet -r wuftpd command before upgrading
the operating system.
If you want to reinstall the Web upgrade, which is already enabled on the operating
system, revert to the previous version of WU-FTPD using the enable_inet -r
wuftpd command, before reinstalling the Web upgrade.
Verifying the WU-FTPD 2.6.1 Installation
To verify whether the WU-FTPD 2.6.1 depot is installed successfully on your system,
enter the following command at the HP-UX prompt:
# swlist -l bundle | grep bundle_name
If WU-FTPD 2.6.1 is installed properly, the following output is displayed:
• On an HP-UX 11i v1 operating system
WU-FTP-261 B.11.11.01.014 WU-FTPD-2.6.1 special release upgrade
• On an HP-UX 11i v2 operating system
ftp-ssl-ncf B.11.23.01.001 ftp-ssl-ncf web release
• On an HP-UX 11i v3 operating system
HPUX-FTPServer C.2.6.1.5.0 HPUX FTP Server
Known Problems and Limitations
WU-FTPD 2.6.1 does not have any known problems and limitations.
Related Information
The following sections discuss the documentation available for WU-FTPD 2.6.1.
Known Problems and Limitations 47