HP-UX 11i v3 Installation and Update Guide, March 2013

For further information, including disk requirements, supported peripherals, and preparing
the client for installation, see the Ignite-UX Administration Guide (http://www.hp.com/go/
ignite-ux-docs).
NOTE: The lunpath hardware path selected is used only to identify the Root Disk itself, and
any available path to that disk may then be used as boot path. Therefore, it is normal to see
a different lunpath hardware path to the disk used as boot path.
4. In the File System field, select the type of volume manager and file system you want to use for
your root disk. Press Enter to view the choices.
5. In the Languages field, press Enter to browse the available languages, marking the desired
selections. You can make any of the selections your system default language. This will become
the system default language after it is installed. Make sure HPUXLocales is marked Yes.
The locale settings that were previously in HP-UX 11i v2 and located in the Common Desktop
Environment (CDE) language bundle are now located in the HPUXLocales bundle. The
HPUXLocales bundle contains internationalization support for many languages. This support
includes date and time formats, currency, sorting methods, and so on.
NOTE:
CDE is an optional product in HP-UX 11i v3. If you require it, you must explicitly select the
CDE bundle (CDE-xxx). This applies if you need dtterm, which is located in CDE. For some
localization situations, dtterm is required; therefore CDE must be selected.
6. Use the Software tab to change the software that will be installed on your system, if desired.
If you choose the No User Interface option, then you cannot deselect the recommended
(default-installed) software bundles.
To select or deselect the software bundles:
a. Navigate to the Software tab.
b. Select any optional software that you want loaded onto your system and deselect any
recommended (default-installed) software that you do not want. Browse the list, marking
your selections. Use the arrow keys to select a bundle and the spacebar to change the
option.
The bundles and associated product names are listed in Appendix C: “HP-UX 11i v3
Operating Environment software bundles” (page 84). For information about new and
changed products and features, see the HP-UX 11i Version 3 Release Notes appropriate
for the release you are cold-installing. The document is available on the Instant Information
DVD and at http://www.hp.com/go/hpux-core-docs-11iv3.
CAUTION:
HP recommends that you do not deselect recommended (default-installed) software bundles
or remove them from your system unless you know for certain that the software contained
in these bundles is not required for your operating environment. Software might have
unstated dependencies. Deselecting software might prevent products with dependencies
on the software you deselected from functioning correctly.
Installing HP-UX 11i v3 installs a minimum set of default networking and mass storage
drivers that apply to the system. You might need to select or specify other available
networking and mass storage drivers to enable other cards on your system.
40 Cold-installing HP-UX 11i v3 from local media