HP-UX 11i v3 Installation and Update Guide, September 2009 (Update 5 Release)

NOTE: On partitionable systems only the core cell is searched by default. If you
want to search all cells, you can use the all option to the sea command or provide
a cell number to search. Using the all option may take a significant amount of
time if a large number of I/O devices are connected to the system. The valid options
to the sea command for the system you are using will be shown when you interrupt
the boot process to gain access to the BCH prompt.
6. For a legacy hardware path, boot from the DVD drive using the listed path number.
Note that if you know the agile hardware path, you may enter it as well. However,
it requires a specific format compatible with the BCH interface limited to 32-bit
elements. Use the command ioscan -e to display the boot path format to be
used here to enter a lunpath hardware path in the BOOT command.
For an agile hardware path, boot from the DVD drive using the full agile hardware
path name:
BOOT full_hardware_path
7. After a few minutes, at the Interact with IPL? prompt, press n.
The install kernel loads (3-5 minutes), after which a screen might prompt you to
enter the keyboard language of your console.
8. Enter the number and press Enter again to confirm.
Customizing your installation
Once the system is booted, it displays the Ignite-UX Welcome screen for the HP-UX
installation process.
Navigation tips
The following tips will help you navigate the installation interface:
• Use the Tab key to navigate between fields and the arrow keys to navigate within
fields.
• Pressing Enter or the spacebar opens a menu list.
• Use the Enter key to select an item.
• For Help, use Ctrl-K for navigation-key help and Ctrl-F (or F1) for context-sensitive
help.
• You can enter the underlined letter of an item (such as I for install HP-UX) to
navigate more quickly.
The remainder of this section describes how to choose the degree of customization
needed to configure your installation.
Proceeding with the installation 49