HP-UX HB v13.00 Ch-04 - System Recovery

HP-UX Handbook – Rev 13.00 Page 52 (of 54)
Chapter 04 System Recovery
October 29, 2013
*** HP-UX Boot Loader for IA-64 ****
*** Version 1.65 ****
*** Type 'help' for help ****
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
AUTO BOOT> boot vmunix
System Memory = 4091 MB
loading section 0
.................................
loading section 1
.....
Loading symbol table. Num of Sec Header(29)
Loading System Directory(boot.sys) to MFS
.....
Loading Kernel Boot Directory(boot.3AD5C7894389) to MFS.
.....
Launching /stand/vmunix
SIZE: Text:16685K + Data:2071K + BSS:1410K = Total:20167K
Booting kernel...
PAL_DEBUG_FEATURE [CPU 0]: 0x4, multi-dispersal
PAL_DEBUG_FEATURE [CPU 1]: 0x4, multi-dispersal
PAL_DEBUG_FEATURE [CPU 2]: 0x4, multi-dispersal
PAL_DEBUG_FEATURE [CPU 3]: 0x4, multi-dispersal
WARNING: GIO: read_ioconfig_file(): /stand/ioconfig read error.
ioconfig = NULL
NOTICE: nfs3_link(): File system was registered at index 4.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: autofs_link(): File system was registered at index 6.
qlisp_multi(0): QLogic 12160 dual Ultra3 SCSI
qlisp(5): Loaded QLogic ISP, Ver: 10.04.08, Mode: NV-AUTO DMA64 FP
Boot device's HP-UX HW path is: 0.18.1.2.0.0.1.0
System Console is on the Built-In Serial Interface
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 99, minor is 0x1; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Starting vxconfigd in boot mode (pre_init_rc).
NOTICE: vxvm:vxdmp: added disk array SEAGATE_DISKS
If the ioconfig file is missing, the following two lines will be displayed.
ioconfig_lock: Cannot open /etc/ioconfig with specified flags.
ioconfig_lock: Cannot open /etc/ioconfig with specified flags.
Error returned from vxconfigd -m boot, halting
Restoring the device and ioconfig files
Boot the system to VxVM maintenance mode.
Welcome to HP-UX for IA64
setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Shell> fs1:
fs1:\> hpux -vm
VxVM maintenance mode
*** HP-UX Boot Loader for IA-64 ****
*** Version 1.65 ****
*** Type 'help' for help ****