Migrating an Integrity HP-UX 11iv3 Instance to New Hardware

19
From the Ignite-UX installation screens, choose the configuration that was created in the previous
steps. If the system is being cloned, specify the correct configuration (hostname, IP address, etc.)
that is used for the target system.
Step 15: Boot and test the target system.
Determine whether additional data volumes need to be made available to the target. For example,
additional SAN LUNs may need to be presented to the target and vgimported on the target system.
Additional testing can be used to ensure that applications run correctly on the new hardware.
Step 16: Return to the source, if the target is not as desired
If the target system does not work as expected, the target can be shutdown or removed from the
network. If a move scenario was used, the source system can be rebooted. If a clone scenario was
being executed, the depots used can be modified and the process repeated.