HP Instant Capacity Version 10.x User Guide (5900-1581, March 2011)

NOTE: For necessary HP-UX updates, install the latest Operating Environments Update Release
(OEUR) or Application Release (AR) update, if possible. This ensures that you install all required
products and versions. Instant Capacity does not work correctly with HP-UX releases prior to
December 2004.
Your Instant Capacity system is ordered and shipped with all of the following required software
and dependent products, with the exception of the vPars software. If your system’s operating system
is reinstalled or installed with Ignite-UX, ensure that the following software requirements are satisfied.
HP-UX 11i v1 Requirements and Dependent Products
The following software is required for Instant Capacity version 9.x on HP-UX 11i v1:
• HP-UX 11i v1
• iCOD software bundle B9073BA (version 9.x) — On the 11i v1 Applications Software media,
or download the most recent version from the HP Software Depot at:http://www.hp.com/go/
softwaredepot
• The kernel configuration must include the diag2 module.
• WBEM B8465BA bundle (version A.02.05 or higher)
• nParProvider bundle (version B.12.01.06.02 or higher, available from the OE media)
• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle
T1335AC) must be version A.03.05 or higher. vPars is available separately and is not included
with the OE.
• (GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to
a value of “optional” on all GiCAP Group Managers and on all OS instances of all member
systems. (The CIM Server may need to be restarted if the property was not previously set to
this value.) For details, see cimconfig(1M). Note that communication between the managers
and members of groups is established using SSL certificates that are supplied by the GiCAP
software.
Required Patches for HP-UX 11i v1
The following patches are required for Instant Capacity version 9.x on HP-UX 11i v1:
• PHKL_22987: S700_800 11.11 pstat() patch (Use only if your system runs
MeasureWare software)
• PHKL_23154: S700_800 11.11 dflush() patch
• PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang
fix
• PHKL_26232: S700_800 11.11 Psets Enablement patch,FSS iCOD patch
• PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number
• PHCO_24396: S700_800 11.11 /etc/default/tz patch
• PHCO_24477: S700_800 11.11 sar (1M) patch
• PHCO_29832: S700_800 11.11 reboot(1M) patch
• PHCO_29833: S700_800 11.11 killall(1M) patch
20 Getting Started