HP Instant Capacity Version 10.x User Guide (762794-001, March 2014)

GiCAP group CloudProd does not exist.
#
Action: Create a group before adding members.
# icapmanage -a -m sd2prod1:sd2prod1oa1.corp.hp.com -g CloudProd
NOTE: sslClientVerificationMode on cloud-gm.corp.hp.com is either disabled
or will be disabled if the CIM Server there restarts. sslClientVerificationMode
must be enabled on cloud-gm.corp.hp.com if GiCAP operations involving it are
to succeed. See the cimconfig(1M) manpage for information on how to enable
sslClientVerificationMode.
Enter the password for the administrator on sd2prod1oa1.corp.hp.com:
Member sd2prod1 added to group CloudProd.
#
sslClientVerificationMode must be "optional" on AGM.
Action: Perform the following commands on AGM:
cimconfig -s sslClientVerificationMode=optional –p
cimserver –s
cimserver
# icapmanage -a -m sd2prod1:sd2prod1oa1.corp.hp.com -g CloudProd
Enter the password for the administrator on sd2prod1oa1.corp.hp.com:
Enter the password for active_gm on sd2prod1oa1.corp.hp.com:
icapmanage command failed.
sd2prod1 is already a member of a group managed by 192.168.10.10.
#
sd2prod1oa1> icapstatus
..(snip)..
Member sd2prod1 in GiCAP group CloudProd1
Active Group Manager: 192.168.10.10
Standby Group Manager: 192.169.15.4
Borrowed core usage rights: 0
Borrowed memory usage rights: 0.0 GB
As long as the member removal is not performed on the old AGM (192.168.10.10), the member
addition attempt does not work on the new AGM.
nl
Action: If the old AGM is still present, add the member again and remove it from the group. If this
is not possible, please contact HP Response Center to make a non-GiCAP group member codeword
request.
# icapmanage -a -m sd2prod1:sd2prod1oa1.corp.hp.com -g CloudProd
Enter the password for the administrator on sd2prod1oa1.corp.hp.com:
Enter the password for active_gm on sd2prod1oa1.corp.hp.com:
icapmanage command failed.
The member candidate system already has the maxmimum number of CA certificates installed.
Please make space for a CA certificate and try again.
The maximum number of CA certificates is 12.
Action: Check the installed CA certificates using show ca certificate. Remove the unnecessary
CA certificates using remove ca certificate and reduce the total number to 11 or less.
# icapmanage -a -m sd2prod2:sd2prod2oa1.corp.hp.com -g CloudProd
Enter the password for the administrator on sd2prod2oa1.corp.hp.com:
Enter the password for active_gm on sd2prod2oa1.corp.hp.com:
NOTE: Could not set up secure communication between the standby group
manager, sgm.corp.hp.com, and one or more of the member
hosts. If sgm.corp.hp.com needs to become the active manager
it may not be able to take control of this group member.
This can happen for a number of reasons. Fix any problems noted
below then reissue this command.
NOTE: The member candidate system already has the maxmimum number of CA certificates installed. Please make
space for a CA certificate and try again.
127