HP Instant Capacity Version 10.x User Guide (762794-001, March 2014)

HP-UX 11i v1 requirements and dependent products
The following software is required for iCAP version 9.x on HP-UX 11i v1:
• HP-UX 11i v1
• iCOD software bundle B9073BA (version 9.x) — On the 11i v1 Applications Software media,
or download the most recent version from the HP Software Depot at:http://www.hp.com/go/
softwaredepot
• The kernel configuration must include the diag2 module.
• WBEM B8465BA bundle (version A.02.05 or higher)
• nParProvider bundle (version B.12.01.06.02 or higher, available from the OE media)
• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle
T1335AC) must be version A.03.05 or higher. vPars is available separately and is not included
with the OE.
• (GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to
a value of “optional” and enableHttpsConnection must be set to “true” on all GiCAP Group
Managers and on all OS instances of all member systems. (The CIM Server may need to be
restarted if the property was not previously set to this value.) For details, see cimconfig(1M).
Note that communication between the managers and members of groups is established using
SSL certificates that are supplied by the GiCAP software.
Required patches for HP-UX 11i v1
The following patches are required for iCAP version 9.x on HP-UX 11i v1:
• PHKL_22987: S700_800 11.11 pstat() patch (Use only if your system runs
MeasureWare software)
• PHKL_23154: S700_800 11.11 dflush() patch
• PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang
fix
• PHKL_26232: S700_800 11.11 Psets Enablement patch,FSS iCOD patch
• PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number
• PHCO_24396: S700_800 11.11 /etc/default/tz patch
• PHCO_24477: S700_800 11.11 sar (1M) patch
• PHCO_29832: S700_800 11.11 reboot(1M) patch
• PHCO_29833: S700_800 11.11 killall(1M) patch
IMPORTANT: For the most recent required patches, see the iCAP Installation page on the HP
Software Depot (search for “B9073BA”):
http://www.hp.com/go/softwaredepot
HP-UX 11i v2 requirements and dependent products
The following software is required for iCAP version 10.x on HP-UX 11i v2:
• HP-UX 11i v2
• iCOD software bundle B9073BA (version 10.x) — On the 11i v2 Applications Software
media, or download the most recent version from the HP Software Depot at:http://
www.hp.com/go/softwaredepot
• The kernel configuration must include the diag2 module.
• WBEM B8465BA bundle (version A.02.05 or higher)
iCAP requirements 21