HP Instant Capacity Version 10.x User Guide (762794-001, March 2014)

• nParProvider bundle (version B.23.01.06.02 or higher, available from the OE media)
• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle
T1335BC) must be version A.04.01 or higher. vPars is available separately and is not included
with the OE.
• (GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to
a value of “optional” and enableHttpsConnection must be set to “true” on all GiCAP Group
Managers and on all OS instances of all member systems. (The CIM Server may need to be
restarted if the property was not previously set to this value.) For details, see cimconfig(1M).
Note that communication between the managers and members of groups is established using
SSL certificates that are supplied by the GiCAP software.
NOTE: On HP-UX 11i v2 systems, updated firmware might be required by the nPar or Virtual
Partition software, as documented for these products.
Required patches for HP-UX 11i v2
The following patches are required for iCAP version 10.x on HP-UX 11i v2:
• PHKL_33752: S700_800 11.23 Itanium 2 Processor speed reporting patch
required only for IA systems
• PHCO_34721: killall(1M) patch
• PHKL_35174: _CS_PARTITION_IDENT patch required for GiCAP on rx8640 and rx7640
systems
IMPORTANT: For the most recent required patches, see the iCAP Installation page on the HP
Software Depot (search for “B9073BA”):
http://www.hp.com/go/softwaredepot
HP-UX 11i v3 requirements and dependent products
The following software is required for iCAP version 10.x on HP-UX 11i v3:
• HP-UX 11i v3
• iCOD software bundle B9073BA (version 10.x) — Installed automatically when the HP-UX
11i v3 Operating Environment (OE) is installed, or download the most recent version from
the HP Software Depot at http://www.hp.com/go/softwaredepot.
• The kernel configuration must include the diag2 module.
• WBEMSvcs bundle (version A.02.09 or higher)
• nParProvider bundle (version B.31.01.07.01 or higher, available from the OE media)
• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle
T1335BC) must be version A.05.01 or higher. vPars is available separately and is not included
with the OE.
• (GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to
a value of “optional” and enableHttpsConnection must be set to “true ”on all GiCAP Group
Managers and on all OS instances of all member systems. (The CIM Server may need to be
restarted if the property was not previously set to this value.) For details, see cimconfig(1M).
Note that communication between the managers and members of groups is established using
SSL certificates that are supplied by the GiCAP software.
Required patches for HP-UX 11i v3
For iCAP Version 10.00 and later, on HP–UX 11i v3 HP Integrity systems, patch PHCO_40927
must be installed. This is a co-requisite.
22 Getting started