Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the L-Class and N-Class Servers
Appendix A114
Configuring and Activating Processors for the
L-Class and N-Class Servers
This section illustrates the procedure for configuring a processor on both
the L-Class and N-Class servers. The BCH interface is practically
identical for both classes of servers.
For additional information on the L- and N-Class boot sequence, and
other operating instructions, please consult the Server Boot Up section
in the Operating Instructions at: docs.hp.com/hpux/hw (for the
appropriate class of server — for example, N-Class).
NOTE Booting a system to the HP-UX prompt from the BCH main menu can be
time consuming, depending on your software and hardware
configuration.
An N-Class system can contain up to 8 processors. Configure these
processors in the following order:
•1
•3
•5
•7
•0
•2
•4
•6
Always deconfigure processors in the reverse order.