Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the V-Class Server
Appendix A120
Configuring and Activating Processors for the
V-Class Server
This section illustrates the procedure for configuring or activating a
processor for the V-Class.
For additional information on the V-Class boot sequence and other
operating instructions please consult the V2500 Server Operator’s Guide
at: docs.hp.com/hpux/hw under V-Class.
Step 1. Reboot the system from the system console either remotely or from the
V-Class test station.
Step 2. Access the V-Class boot menu interface. If autoboot is disabled the
system displays the boot menu by default; otherwise, interrupt the boot
process when prompted by pressing any key.
Command Description
------- -----------
AUto [BOot|SEArch|Force ON|OFF] Display or set the specified flag
BOot [PRI|ALT|<path> <args>] Boot from a specified path
BootTimer [time] Display or set boot delay time
CLEARPIM Clear PIM storage
CPUconfig [<cpu>] [ON|OFF|SHOW] (De)Configure/Show Processor
DEfault Set the system to defined values
DIsplay Display this menu
ForthMode Switch to the Forth OBP interface
IO List the I/O devices in the system
LS [<path>|flash] List the boot or flash volume
PASSword Set the Forth password
PAth [PRI|ALT|CON] [<path>] Display or modify a path
PDT [CLEAR|DEBUG] Display/clear Non-Volatile PDT state
PIM_info [cpu#] [HPMC|TOC|LPMC] Display PIM of current or any CPU
RemoteCommand node# command Execute command on a remote node
RESET [hard|debug] Force a reset of the system
RESTrict [ON|OFF] Display/Select restricted access to Forth
SCSI [INIT|RATE] [bus slot val] List/Set SCSI controller parms
SEArch [<path>] Search for boot devices
SECure [ON|OFF] Display or set secure boot mode
TIme [cn:yr:mo:dy:hr:mn[:ss]] Display or set the real-time clock
VErsion Display the firmware versions
[0] Command: