Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Offline Configuration and Activation of Processors
Configuring and Activating Processors for the V-Class Server
Appendix A124
7 Processor not installed
8 Processor configured, not flagged to be deconfigured
9 Processor not installed
10 Processor configured, not flagged to be deconfigured
11 Processor not installed
12 Processor not installed
13 Processor not installed
14 Processor not installed
15 Processor not installed
16 Processor configured, not flagged to be deconfigured
17 Processor not installed
18 Processor configured, not flagged to be deconfigured
19 Processor not installed
20 Processor not installed
21 Processor not installed
22 Processor not installed
23 Processor not installed
24 Processor configured, not flagged to be deconfigured
25 Processor not installed
26 Processor configured, not flagged to be deconfigured
27 Processor not installed
28 Processor not installed
29 Processor not installed
30 Processor not installed
31 Processor not installed
[0] Command:
Step 7. Reset the system to configure the processors. Enter the command RESET.
Boot the system to the HP-UX prompt.
[0] Command: RESET
Step 8. At the system prompt, activate the configured processors with the
icod_modify command (see “Increasing Processor Capacity” on
page 58).
Step 9. Verify that the processors are available with the ioscan
HP-UX command. Note the information provided by ioscan on the
number of active processors is different from that reported during
configuration.
/> ioscan -fk|grep -i proc
processor 0 16 processor CLAIMED PROCESSOR Processor
processor 1 18 processor CLAIMED PROCESSOR Processor