Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Understanding iCOD Requirements
Software Requirements
Chapter 2 21
Software Requirements
iCOD systems are required to run the iCOD software which e-mails asset
report information to an audit system located at HP. Your system must
continue to send asset reports, via e-mail to HP, until all program
requirements are fulfilled. Refer to “When iCOD Program Requirements
End” on page 40 for details.
IMPORTANT This document lists the patches required to install and run iCOD
versions B.05.x known at the time of publication. To find the most
current patches, see “How To Find The Latest Patches” on page 42 for
detailed instructions.
HP-UX 11.0 Requirements
For iCOD Versions
B.05.x on
HP-UX 11.0
The following software is required for iCOD versions B.05.x on HP-UX
11.0:
❏ iCOD software bundle B9073AA (version B.05.01) located at the
following HP web site:
software.hp.com
❏ HP-UX 11.0 (Extension Pack 9905)
❏ kernel driver diag2
Your iCOD system is shipped with the correct version of HP-UX, the
iCOD software bundle, and the kernel driver diag2. In the event your
system’s operating system is re-installed or installed with Ignite-UX,
ensure that the above software requirements are satisfied. The kernel
driver diag2 is part of standard HP-UX. Since diag2 is an iCOD
software dependency, this driver must not be removed from the kernel.