Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Understanding iCOD Requirements
E-Mail Requirements
Chapter 2 29
Configuring iCOD’s FROM E-mail Address
One of the e-mail requirements of the iCOD program is that the FROM
e-mail address, on e-mail messages sent by the iCOD software from your
iCOD system to HP, must be DNS resolvable.
The iCOD software uses [e-mail] as the default FROM
e-mail address (where localhost is the hostname of your iCOD system
and domain is its DNS domain). If the default FROM e-mail address is
undesirable, you can configure the iCOD B.05.x software to use a FROM
address you specify.
Configuring a
Specified FROM
Address
To configure your specified iCOD FROM e-mail address, execute the
following command:
/usr/sbin/icod_modify -f from_address
You can verify the configured iCOD FROM e-mail address by using the
/usr/sbin/icod_stat command.
After you have configured a specified FROM e-mail address, the iCOD
software uses it on all subsequent e-mail messages sent from your iCOD
system to HP.
Reverting to the
Default FROM
Address
If you have specified an iCOD FROM e-mail address and you want to
revert to the default iCOD FROM e-mail address
([e-mail]), execute the following command:
/usr/sbin/icod_modify -f ““