Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Understanding iCOD Requirements
E-Mail Requirements
Chapter 2 35
Testing E-Mail Transmission of the Asset Report
NOTE The following procedure assumes your iCOD system is capable of
sending internet e-mail and your system contact information is
configured.
Execute the following command to send your asset report, via e-mail, to
HP:
/usr/sbin/icod_notify
You should receive an acknowledgment e-mail message from HP
confirming the receipt of your asset report. Use an e-mail client to verify
the acknowledgement e-mail message from HP to the system contact.
The reply should look like the following (note that only
hardware-partionable systems have Local Partition information):
Subject: Asset Report Acknowledgement & License Key
HP has received your iCOD information
System: super
Serial Number: USR99USR99
Software Id #: Zabc339dkfj
System TimeStamp: 09/01/2001 18:00
Local Partition: 0
If you have not already done so, you may now apply the
license to use iCOD software on the specified system. The
license can be applied by executing the following command on
the specified system:
/usr/sbin/icod_modify -l 123abcde123abce123
For more information, see the icod(5) manpage or iCOD
documentation at http://docs.hp.com