Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

Installing and Uninstalling iCOD Software

Updating/Installing iCOD Software

Chapter 344

For HP-UX 11i v1 - Installing from the Support Plus

Follow this procedure to install or upgrade your HP-UX 11i v1 iCOD

system to version B.05.01:

Step 1. Log in as root.

Step 2. Determine the CD drive device file by entering the following command:

ioscan -fnC disk

Step 3. Insert the Support Plus CD into the CD drive.

Step 4. Mount the CD drive to the desired directory. The following example uses

the /dev/dsk/c1t2d0 device file (from

Step 2, above) and the /cdrom

directory. To mount the CD drive, enter a similar command as:

Mount Example:

mount -r /dev/dsk/c1t2d0 /cdrom

Step 5. Install the iCOD B.05.01 bundle B9073AA from the CD:

swinstall -s /cdrom/DIAGNOSTICS/B.11.11 B9073AA

Step 6. Install the required patches from the HWEnable11i bundle on the

Support Plus CD. Note that these patches require an automatic reboot.

To install the required patches, enter the following command:

swinstall -x autoreboot=true -x patch_match_target=true \

-s /cdrom/HWEnable11i ’*’

Step 7. Continue with “For All Installations” on page 46.

For HP-UX 11.0 - Installing from the HP Software

Depot

Step 1. Do a search for “B9073AA” at HP’s Software Depot web site:

software.hp.com

Step 2. Select the link, that appeared as a result of your search, and read the

Overview page.

Step 3. On the Overview page, click on the

Receive for Free button.

Step 4. Fill in the registration information, select the

HP-UX 11.00 operating

system, and then click on the

Next button.