How to migrate HP-UX workloads between physical and virtual servers easily

Figure 11. Servers seen by IO

Verifying NPIV support in an HP Integrity VM host

The following explains how to verify the support of the NPIV technology on visor1 that will host the v2p2v_ls

logical server:

List all Fiber Channel capable devices:

visor1# ioscan -funC fc | grep dev

/dev/fcd0

/dev/fcd1

Verify the support of NPIV by the Fiber Channel devices:

visor1# fcmsutil /dev/fcd0 | grep NPIV

NPIV Supported = YES

visor1# fcmsutil /dev/fcd1 | grep NPIV

NPIV Supported = YES

Detailed NPIV information can be obtained relative to a specific FC device:

visor1# fcmsutil /dev/fcd0 npiv_info

PFC Hardware Path = 0/0/0/7/0/0/0

PFC DSF = /dev/fcd0

PFC Class Instance = 0

PFC Driver state = ONLINE

PFC Port WWN = 0x5001438002a3000c

PFC Node WWN = 0x5001438002a3000d

PFC Switch Port WWN = 0x200600051e028198

PFC Switch Node WWN = 0x100000051e028198

FlexFC Virtual Fibre Channel (VFC)

----------------------------------

Maximum Supported FlexFC VFC = 8