HP-UX Virtual Partitions Administrator's Guide (includes A.05.02)

Installing, Updating, or Removing vPars and Upgrading Servers with vPars
Upgrading HP 9000 Servers from the sx1000 to sx2000 Chipset
Chapter 4
107
Hardware Path Tables
The following tables show the new hardware paths. For details on the new hardware paths and other
hardware information, see the applicable hardware upgrade manuals for your server, available at
http://docs.hp.com.
Table 4-4 rp7420 to rp7440 Hardware Path Changes
rp7420 Path rp7440 Path Description
1/0/1/1/0/1/1.6 1/0/1/1/0/4/1.6 Top right HDD using A6794A or AB290A
0/0/0/3/0.6 0/0/0/3/0.6 Bottom left HDD using MP/SCSI
0/0/0/3/0.5 0/0/1/1/0/4/1.5 Bottom right HDD using MP/SCSI or AB290A
1/0/0/3/1.x 1/0/0/3/1.x Internal DVD/tape (x=2 for DVD, x=3 for DAT)
0/0/0/3/1.2 Bottom slimline DVD, if present
1/0/1/1/0/4/0 1/0/1/1/0/6/0 Primary LAN
1/0/1/1/0/6/1 Secondary LAN
0/0/8/1/0/4/0 0/0/1/1/0/6/0 Primary LAN
0/0/1/1/0/6/1 Secondary LAN
1/0/1/1/0/1/0.x 1/0/1/1/0/4/0.x external SCSI (A6794A/AB290A)
1/0/1/1/0/4/1.x external SCSI (AB290A), shared with internal HDD
0/0/8/1/0/1/0.x 0/0/1/1/0/4/0.x external SCSI (A6794A/AB290A)
0/0/1/1/0/4/1.x external SCSI (AB290A), shared with internal HDD
Table 4-5 rp8420 to rp8440 Hardware Path Changes
rx8620 Path rx8640 Path Description
0/0/0/0/0 N/A simplecom
0/0/0/0/1 [rootcell]/250/2 console UART
1/0/0/0/0 N/A simplecom
1/0/0/0/1 [rootcell]/250/2 console UART
Table 4-6 HP 9000 Superdome Hardware Path Changes (x=cell)
Slot sx1000 Path sx2000 Path
0 x/0/0/1 x/0/0/1
1 x/0/1/1 x/0/1/1
2 x/0/2/1 x/0/2/1