HP-UX Virtual Partitions Administrator's Guide (includes A.05.02)

Installing, Updating, or Removing vPars and Upgrading Servers with vPars

Bundle Names

Chapter 4

Bundle Names

You can install vPars on an existing HP-UX installation directly from a depot, DVD, or by using an Ignite-UX

server.

vPars Product Bundles

The vPars bundle names are:

NOTE For information on versions, including vPars version, OS versions, and other product versions

required to run with vPars, please see the document HP-UX Virtual Partitions Ordering and

Conﬁguration Guide available at

http://docs.hp.com/hpux/11i/index.html#Virtual%20Partitions.

CAUTION Mixing vPars versions within the same nPartition

Mixing different vPars versions within the same nPartition is only supported using vPars

A.05.01 or later with vPars A.04.02 or later. See “Mixed HP-UX 11i v2/v3 vPars Environments

in vPars A.05.xx” on page 66.

For vPars A.04.xx and A.03.xx, within a vPars environment, all OSs and vPars version must be

the same. In other words, vpar1, vpar2, ... vparN must all be running the same OS and vPars

software. Mixing HP-UX 11.11 and 11.23 or vPars A.04.xx and A.03.xx is not allowed.

Bundle Name Description

T1335CC vPars A.05.xx for HP-UX 11i v3

T1335BC vPars A.04.xx for HP-UX 11i v2

Feature11i (HP-UX 11i v2 only)

Required vPars enablement patches for vPars A.04.xx.

This bundle can be obtained from the HP-UX Update OE

DVD.

When the Feature11i and vPars product bundles are in

the same depot, this bundle should be automatically

selected when the vPars bundle is selected.

For a complete list of required patches, see the HP-UX

Virtual Partitions Release Notes.

T1335AC vPars A.03.xx for HP-UX 11i v1