HP-UX vPars and Integrity VM V6.3 Administrator Guide

Example 32 Configuration
An SD2 system configured as VSP running vPars and Integrity VM 6.3, with two active guests and
the system has a dual ported NIC supporting FLA, each port of the FLA NIC assigned to two different
active guest.
# hpvmstatus
[Virtual Machines]
Virtual Machine Name VM # Type OS Type State #VCPUs #Devs #Nets Memory
==================== ==== ==== ======= ===== ====== ===== ===== =======
guest1 1 SH HPUX On(OS) 1 1 3 2 GB
guest3 3 SH HPUX On(OS) 2 1 1 2 GB
Dual ported NIC supporting DLA is residing in an OL* capable slot and configured to DIO pool.
# hpvmhwmgmt -p dio -l
Assignment
H/W Path Class Owner Description Level Label
============== ===== ===== ================== =================
40/0/1/0/0/0/0 lan hpvm HP AT118A 2p 10GbE PCIe A function
40/0/1/0/0/0/1 lan hpvm HP AT118A 2p 10GbE PCIe A function
The slot details of the DLA NIC is as follows:
# olrad -q
Slot Path Link Max Max Link Pwr Occu Susp OLAR OLD Mode
Spd Link Link Width
Spd Width
9-0-1-1-0-5 40/0/1/0/0/0 5.0 5.0 x8 x8 On Yes No Yes Yes PCIe
# ioscan -kfnC hpvmdio
Class I H/W Path Driver S/W State H/W Type Description
======= === ============== ======== ========== ========= =============================
hpvmdio 5 40/0/1/0/0/0/0 hpvmdio CLAIMED INTERFACE HP AT118A 2p 10GbE PCIe Adapter
/dev/hpvmdio5
hpvmdio 1 40/0/1/0/0/0/1 hpvmdio CLAIMED INTERFACE HP AT118A 2p 10GbE PCIe Adapter
/dev/hpvmdio1
Each port of the FLA NIC is assigned to two different active guest (Guest id 1 and Guest id 3) with
each configured with IP address and connected to network.
# hpvmdevinfo -M | grep dio
palace1:guest1:1:lan:dio:0;5;0xF688359C7B15:hwpath:40/0/1/0/0/0/0:0/0/5/0 (lan1)
palace1:guest3:3:lan:dio:0;5;0x96A442D65C83:hwpath:40/0/1/0/0/0/1:0/0/5/0 (lan1)
In the VM guest 1 and VM guest 3, the DIO functions (port) is seen as lan1 (path 0/0/5/0) and
IP addresses are configured for both the ports.
On VM guest 1
# ioscan -kfnC lan
Class I H/W Path Driver S/W State H/W Type Description
===== == ========= ======= ========= ========= ===============================
lan 1 0/0/5/0 iocxgbe CLAIMED INTERFACE HP AT118A 2p 10GbE PCIe Adapter
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
an1 1500 15.0.0.0 15.213.153.214 8 0 8 0 0
On VM guest 3
# ioscan -kfnC lan
Class I H/W Path Driver S/W State H/W Type Description
===== == ======== ======= ========= ========= ===============================
lan 1 0/0/5/0 iocxgbe CLAIMED INTERFACE HP AT118A 2p 10GbE PCIe Adapter
# netstat -in
180 PCI OLR support on VSPs