HP-UX vPars and Integrity VM V6.3 Administrator Guide

# ioscan -m lun /dev/rtape/tape5_BEST
Class I Lun H/W Path Driver S/W State H/W Type Health Description
======================================================================
tape 5 64000/0xfa00/0x1 estape CLAIMED DEVICE online HP Ultrium 3-SCSI
0/5/0/0/0/0.0x500110a0008b9de2.0x0
/dev/rtape/tape5_BEST /dev/rtape/tape5_BESTn
/dev/rtape/tape5_BESTb /dev/rtape/tape5_BESTnb
# ioscan -m lun /dev/rtape/tape6_BEST
Class I Lun H/W Path Driver S/W State H/W Type Health Description
======================================================================
tape 6 64000/0xfa00/0x3 estape CLAIMED DEVICE online STK T9840B
0/4/1/0.0x500104f0004732d9.0x0
0/4/1/1.0x500104f0004732d9.0x0
0/4/1/0.0x500104f0004732da.0x0
0/4/1/1.0x500104f0004732da.0x0
/dev/rtape/tape6_BEST /dev/rtape/tape6_BESTn
/dev/rtape/tape6_BESTb /dev/rtape/tape6_BESTnb
Device tape5 is connected to the VSP using a single HBA port (initiator). It has one lunpath
through initiator (0/5/0/0/0/0). Device tape6 is connected to the VSP using two HBA ports
(initiators). It has four lunpaths through two initiators (0/4/1/0 and 0/4/1/1).
6.4 Configuring vPar and VM guest storage 87