Installing and Managing HP-UX Virtual Partitions (A.02.01)

Monitor and Shell Commands
Setting and Booting a Virtual Partition Using Primary and Alternate Boot Paths
Chapter 5 117
PrimaryBoot Path : 0/0/6/0/0.5.0
Alternate Boot Path : 2/0/14/0/0.6.0
HA Alternate Boot Path : 0/0/6/0/0.5.0
Changing the nPartition’s Path (Complex Profile Data)
To change the nPartition’s alternate path to 0/0/6/0/0.4.0, run the
command:
winona2# parmodify -p0 -t 0/0/6/0/0.4.0
Command succeeded.
The nPartition’s alternate path has now changed:
winona2# parstatus -p0 -V
[Partition]
Partition Number : 0
Partition Name : npar0
Status : active
IP address : 0.0.0.0
PrimaryBoot Path : 0/0/6/0/0.5.0
Alternate Boot Path : 0/0/6/0/0.4.0
HA Alternate Boot Path : 0/0/6/0/0.5.0