Installing and Managing HP-UX Virtual Partitions (A.02.01)

Monitor and Shell Commands
Shutting Down or Rebooting the Hard Partition (rebooting the vPars monitor)
Chapter 5 121
c. To power off the cells assigned to the nPartition, access the GSP
using Ctrl-B. You can then go to the Command Menu and use
the command PE to power off the cells. For example:
MON> ^B
GSP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
GSP> cm
Enter HE to get a list of available commands
GSP:CM> PE
This command controls power enable to a hardware device.
B - Cabinet
C - Cell
I - IO Chassis
Select Device: c
Enter cabinet number: 0
Enter slot number: 6
The power state is ON for the Cell in Cabinet 0, Slot
6.
In what state do you want the power? (ON/OFF) OFF
GSP:CM>
WARNING
Before modifying power settings and for detailed
warnings and information on power for nPartition-able
servers, please read the section "Powering Cells and I/O
Chassis On and Off" in the manual HP System Partitions
Guide available at http://docs.hp.com.