Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars
Installation
Chapter 478
You will see a message indicating the command execution will take a few
seconds and then a message indicating that your settings have been
updated.
The virtual partitions that you create will use this terminal-type setting
for their virtual console displays.
TIP If you get a garbled display, you can press Ctrl-L to refresh the display.
Setting Up the Ignite-UX Server
NOTE To use an Ignite-UX server to install the vPars software, you must be
running Ignite-UX version B.3.4.115 (September 2001) or higher.
If you will be using Ignite-UX, see “Ignite-UX and other Curses
Applications” on page 27.
For quick steps in setting up your Ignite-UX Server to include the vPars
bundles, you can use the "cookbook" information provided by the ITRC.
You can access this information by:
1. Go to the ITRC web site:
http://itrc.hp.com
2. Under maintenance and support, select search technical
knowledgebase
3. Enter the keyword vPars
4. You will see Ignite-UX & vPars Cookbook
For complete information on Ignite-UX, see the manual Ignite-UX
Administration Guide.