Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars
Installation
Chapter 4 79
Updating the Ignite-UX Server
CAUTION If you are using Ignite-UX versions B.3.4.XX (September 2001),
B.3.5.XX (December 2001), or B.3.6.XX (March 2002), in addition to
adding the vPars bundles to your Ignite server, you need to replace the
existing file /opt/ignite/boot/WINSTALL with a vPars-compatible
WINSTALL file using the script named WINSTALL_script.
WINSTALL is a bootable kernel used by Ignite-UX during the installation
and recovery of a virtual partition. WINSTALL_script copies a
vPars-compatible WINSTALL to the correct location on the Ignite-UX
server.
Determining the Version of Ignite-UX
To determine which version of Ignite-UX you are running, execute the
command:
# swlist -l fileset -a revision Ignite-UX.FILE-SRV-11-11
For example, if your swlist output shows
# Initializing...
# Contacting target "rust"...
#
# Target: rust:/
#
Ignite-UX.FILE-SRV-11-11 B.3.5.89
then your Ignite-UX version is B.3.5.89.
Installing a vPars-compatible WINSTALL file using WINSTALL_script
To replace the WINSTALL file on your Ignite-UX server, perform the
following from your Ignite-UX server:
1. Obtain the vPars WINSTALL and WINSTALL_script files:
• From the vPars CD:
If you have purchased the vPars CD, the files are located in the
vParsWINSTALL directory off the root directory of CD.
• From the vPars web site: