Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars
Installation
Chapter 482
# swinstall -s /cdrom B68266AA
To remove the Partition Manager product:
# /usr/sbin/swremove PartitionManager
Note that the PartitionManager product can be removed only after the
vPars product is removed from a virtual partition.
B6191AAE (Online Diagnostics) Online Diagnostics is not
automatically installed when vPars is installed. If you wish to use Online
Diagnostics, you need to manually select this bundle during your
Software Distributor (SD) or Ignite-UX session or addthis bundle toyour
swinstall command line.
To run Online Diagnostics on a vPars system, you need STM version
A.33.00 or later, which is equivalent to OnlineDiag version
B.11.11.07.16 or later.
The Online Diagnostics bundleis available on the vPars CD and from the
vPars web page at http://www.software.hp.com.
To install the Online Diagnostics bundle using the vPars CD:
# swinstall -s /cdrom -x autoreboot=true B6191AAE
To remove the Online Diagnostics product:
# /usr/sbin/swremove OnlineDiag
Note: Removing OnlineDiag also removes the Predictive Support package.
B9073AA (iCOD) iCOD is not automatically installed when vPars is
installed. If you wish to use iCOD, you need to manually select this
bundle during your Software Distributor (SD) or Ignite-UX session or
add this bundle to your swinstall command line.
To run iCOD on a vPars system, you need iCOD version B.05.00 or later.
iCOD is available on the vPars CD andfrom http://www.software.hp.com.
Please note that at the time of this publication, iCOD version B.05.00 for
11i requires the following patches:
PHKL_26232: S700_800 11.11 Psets Enablement patch, FSS iCOD
patch
PHKL_22987: S700_800 11.11 pstat() patch (if running
MeasureWare software)
PHKL_23154: S700_800 11.11 dflush() patch