Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars

Installation

Chapter 4 83

PHKL_25218: S700_800 11.11 kernel patch

See the iCOD web page at http://software.hp.com for the latest patch

information for iCOD.

To install the iCOD bundle using the vPars CD:

# swinstall -s /cdrom -x autoreboot=true B9073AA

To remove the iCOD bundle:

# /usr/sbin/swremove B9073AA

NOTE The iCOD product B9073AA should not be selected for installation

unless you are already participating in the iCOD program.

For complete information and notes on installing, removing, and

conﬁguring iCOD, see the section "Installing and Un-installing iCOD

Software" in the manual Instant Capacity on Demand (iCOD) User’s

Guide for version B.05.00 available at http://docs.hp.com.

Example Installing vPars and the vPars-related Bundles from CD Below is

an example of using the swinstall command line to install vPars from

the CD:

# swinstall -s /cdrom -x autoreboot=true T1335AC

To install vPars and the vPars-related bundles:

# swinstall -s /cdrom -x autoreboot=true T1335AC VPARMGR \

B68266AA B6191AAE B9073AA

NOTE The products VPARMGR, B6191AAE (Online Diagnostics), and

B9073AA (iCOD) are optional. Also, see NOTE above for iCOD.

Quality Pack

After installing HP-UX, you should also install the latest HP-UX 11i

Quality Pack. You can obtain the latest Quality Pack bundle from the

latest Support Plus CD or from the web:

http://software.hp.com