Installing and Managing HP-UX Virtual Partitions (A.02.01)

Planning Your Virtual Partitions and Installing vPars
Installation
Chapter 4 85
NOTE The server must be in standalone mode for the patches to take effect,
so please do not skip this step.
3. Install the firmware patch as you would in a non-vPars environment.
The firmware patch will reboot your server.
4. After the firmware installation has completed, you can boot the
monitor and virtual partitions as you normally would.
For example, if you have not modified your AUTO file in the LIF area
to boot the vPars monitor and virtual partitions, boot the vPars
monitor (for example, ISL> hpux /stand/vpmon) and then the
virtual partitions (for example, MON> vparload -auto).