Installing and Managing HP-UX Virtual Partitions (includes A.04.02)

Installing, Updating, or Removing vPars and Upgrading Servers with vPars

Patches

Chapter 4

# swinstall -s /cdrom B6826AA

To remove the Partition Manager product:

# /usr/sbin/swremove PartitionManager

Note that the PartitionManager product can be removed only after the vPars product is removed from a

virtual partition.

VPARMGR (vPars A.03.xx and earlier) The vPars GUI (vparmgr) is not automatically installed when vPars

is installed. If you wish to use vparmgr, you need to manually select this bundle during your Software

Distributor (SD) or Ignite-UX session or add this bundle to your swinstall command line.

VPARMGR is available on the vPars CD and from the vPars web page at http://www.hp.com/go/softwaredepot.

To install the VPARMGR bundle using the vPars CD:

# swinstall -s /cdrom VPARMGR

To remove the VPARMGR product:

# /usr/sbin/swremove vParManager

NOTE The product VPARMGR is optional.

Installing vPars and the vPars-related Bundles from CD Below is an example of using the swinstall

command line to install vPars from the CD:

# swinstall -s /cdrom -x autoreboot=true T1335AC

To install vPars and the vPars-related bundles:

# swinstall -s /cdrom -x autoreboot=true T1335AC VPARMGR B6826AA

Patches

See the HP-UX Virtual Partitions Ordering and Configuration Guide for information on the required patches

for vPars.