Installing and Managing HP-UX Virtual Partitions (includes A.04.02)

Installing, Updating, or Removing vPars and Upgrading Servers with vPars

Upgrading Servers from the sx1000 to sx2000 Chipset (Integrity)

Chapter 4

— To delete an old LBA:

# vparmodify -p

vpar_name

-d io:

old_path

• updating the EFI to hardware path mappings using vparefituil:

Example:

— To delete the old entries and update with the new entries:

# vparefiutil -d

# vparefiutil -u

Hardware Path Tables

The tables below show the new hardware paths. For details on the new hardware paths and other hardware

information, see the applicable hardware upgrade manuals for your server, available at http://docs.hp.com.

Table 4-1 rx7620 to rx7640 Hardware Path Changes

rx7620 Path rx7640 Path Description

1/0/1/1/0/1/1.6 1/0/1/1/0/4/1.6 Top right HDD using A6794A or AB290A

0/0/0/3/0.6 0/0/0/3/0.6 Bottom left HDD using MP/SCSI

0/0/0/3/0.5 0/0/1/1/0/4/1.5 Bottom right HDD using MP/SCSI or AB290A

1/0/0/3/1.x 1/0/0/3/1.x Internal DVD/tape (x=2 for DVD, x=3 for DAT)

0/0/0/3/1.2 Bottom slimline DVD, if present

1/0/1/1/0/4/0 1/0/1/1/0/6/0 Primary LAN

1/0/1/1/0/6/1 Secondary LAN

0/0/8/1/0/4/0 0/0/1/1/0/6/0 Primary LAN

0/0/1/1/0/6/1 Secondary LAN

1/0/1/1/0/1/0.x 1/0/1/1/0/4/0.x external SCSI (A6794A/AB290A)

1/0/1/1/0/4/1.x external SCSI (AB290A), shared with internal HDD

0/0/8/1/0/1/0.x 0/0/1/1/0/4/0.x external SCSI (A6794A/AB290A)

0/0/1/1/0/4/1.x external SCSI (AB290A), shared with internal HDD

Table 4-2 rx8620 to rx8640 Hardware Path Changes

rx8620 Path rx8640 Path Description

0/0/0/0/0 N/A simplecom

0/0/0/0/1 [rootcell]/250/2 console UART

1/0/0/0/0 N/A simplecom

1/0/0/0/1 [rootcell]/250/2 console UART