HP-UX Internet Services Administrator's Guide (February 2007)

http://www.docs.hp.com/hpux/netcom/index.html#Internet%20Services
for more information.
If the host is on a network that uses NIS, change its IP address in the /etc/hosts
file on the NIS master server, and issue the following commands to regenerate the
hosts database and push it out to the NIS slave servers:
cd var/yp /usr/ccs/bin/make hosts
4. If the host is moving to a different subnet, change the ROUTE_DESTINATION,
ROUTE_GATEWAY, and BROADCAST_ADDRESS[n] variables in
/etc/rc.config.d/netconf.
If the host is moving to a network that uses a different subnet mask, change the
SUBNET_MASK[n] variable in /etc/rc.config.d/netconf.
5. If the host is moving to a different network, you may have to configure new routes
for it. See “Configuring a Route” (page 29).
6. If the host is on a network that uses gated, change its IP address on all the gated
routers. See “Configuring gated” in the HP-UX Routing Services Administrator’s
Guide at the URL
http://www.docs.hp.com/hpux/netcom/index.html#Internet%20Services
for more information.
7. If the host is a BOOTP client, change its IP address in the /etc/bootptab file on
the BOOTP server. If the host is a BOOTP server, and a BOOTP relay agent is
configured to relay boot requests to the host, change the host’s IP address in the
/etc/bootptab file on the BOOTP relay agent. See “Configuring TFTP and
BOOTP Servers” in the HP-UX Remote Access Services Administrator’s Guide at the
URL
http://www.docs.hp.com/hpux/netcom/index.html#Internet%20Services
for more information.
8. If the host is an NTP server, change its IP address in the /etc/ntp.conf file on
NTP clients. If the host is an NTP client and is moving to another network, you
might have to configure a different NTP server in its /etc/ntp.conf file. See
“Configuring the Network Time Protocol (NTP)” in the HP-UX IP Address and
Client Management Administrator’s Guide at the URL
http://www.docs.hp.com/hpux/netcom/index.html#Internet%20Services
for more information.
9. Reboot the host.
Configuring inetd
The Internet daemon, /usr/sbin/inetd, is the master server for many of the Internet
Services. The inetd daemon listens for connection requests for the services listed in
its configuration file and spawns the appropriate server on receiving a request.
Configuring the Internet Services Software 31