HP-UX Mobile IPv4 A.03.01 Administrator's Guide

OKRCFOKP
OKRCFOKP1RVKQPU4GHGTGPEG
Chapter 10
200
visitors
The visitors option queries mipd and displays information about the Mobile Nodes
visiting a Foreign Agent.
Syntax
-vi[sitors] [-v]
Parameters
-v Verbose option.
Description
The mipadmin utility displays the following information about each Mobile Node:
• MN Home Address: the Mobile Node’s Home Address.
• Home Agent Address: the Mobile Node’s Home Agent’s address.
• Lifetime Remaining: the lifetime remaining for the binding, in seconds.
• Status: The status of the Mobile Node’s registration or de-registration with the
Home Agent. For example, Registration Complete or Registration Pending (the
Foreign Agent has forwarded the Registration Request to the Home Agent and is
waiting for a reply.
• Interface: the interface on which the Mobile Node is using the Home or Foreign
Agent service.
• Care-of Address: the Mobile Node’s current Care-of Address.
If you specify the -v option, mipadmin also displays the following information:
• ID: ID field from the Registration Request, displayed as two 32-bit hexadecimal
values, separated by colon.
• Tunnel Name: on Home Agents, this is the name of the tunnel interface to the
Care-of Address on the Foreign Agent (for a Foreign Agent Care-of Address) or the
Mobile Node (for Co-located Care-of Addresses).
• Encapsulation: type of encapsulation used for the tunnel. HP-UX Mobile IPv4
supports only IP-in-IP encapsulation.
• Mobile Node MAC Addr: MAC (Media Access Control or link-level) address of the
Mobile Node.
Example
mipadmin> -vi -v
_________________________________ VISITOR LIST __________________________
MN Home Address: 111.111.111.111 Home Agent Address:
111.111.111.112
Registration Complete Lifetime Remaining (secs): 100
Interface: lan2 Care-of Address: 4.4.4.4
ID: 0x6f392560:32332e61 Tunnel Name: v4tu0:3
Encapsulation: IP in IP
Mobile Node MAC Addr: 0x31:66:34:61:39:63