OSI Troubleshooting Guide, May 1997

Chapter 3 75
Using OSI and OTS Tools
Managing Your Configuration
The directory where the configuration files may be found is specified by
setting the environment variable OSI_CONFIG. If OSI_CONFIG is not set,
/etc/opt/ots/conf is searched as the default location.
Running osiconfchk
Follow these steps to run the osiconfchk program:
1. Login as root.
2. Type osiconfchk. For details on the options and variables, refer to
the HP-UX online man pages for osiconfchk.
3. If there are no parameter problems, the root prompt re-appears.
Troubleshooting Using osiconfchk
If osiconfchk finds problems with the configuration parameters, it
displays the file the problem was in, the line of the file, and the actual
parameter at fault. The example below shows a sample output of
osiconfchk errors.
/etc/opt/ots/conf/local_app
Line 26:
->ae_local_paddr 7874693.0001.0001 # p-, s-, and t_selector
An even number of hexadecimal digits is required. (CHK023)
First line Configuration file name from X.25, OTS, FTAM, or
X400.
Line number This is the line number from the file.
Next line The actual parameter name and value of the
parameter.
Last line A statement of what osiconfchk found wrong with
the parameter.
Compare this display with the parameter value on the appropriate
worksheet to be sure it was entered correctly.
Read the problem descriptions and take the recommended actions to
correct the configuration problems.