OSI Troubleshooting Guide, May 1997

Chapter 3 83
Using OSI and OTS Tools
Checking OTS Status: otsstat
Example 1
The following example shows the output of otsstat when OTS/9000 is
running and can properly communicate with X.25 and with LAN. The
programmatic access name for the X.25 card is telenet. The interface
name for the LAN is lan0.
/opt/ots/bin/otsstat
OTS: running
lan0: running
telenet: running
NOTE The otsstat command does not include the status of the X.25 and LAN
network services. To check their status, use the x25stat and lanscan
commands.
Example 2
The following example shows the output of otsstat when the OTS/9000
subsystem is not running:
/opt/ots/bin/otsstat
OTS: NOT RUNNING
Example 3
The following example shows the output of otsstat when OTS/9000 is
running, cannot properly communicate with the X.25 link software, but
can communicate with LAN.
/opt/ots/bin/otsstat
OTS: running
lan0: running
telenet: DOWN