OSI Troubleshooting Guide, May 1997

Chapter 3 87
Using OSI and OTS Tools
Dynamic Routing Commands
ES/IS Parameters
Table 3-3 ES/IS Command Parameters
Argument
ots_dests
Parameter
Description
es_nsap dest_net_address Specifies the end system’s NSAP
is_nsap dest_net_address Specifies the intermediate system’s NSAP
subnet_name dest_out_subnet The symbolic name for the outgoing
subnetwork to which this end system is
attached. This name must have been
previously configured before OTS startup.
es_phys_addr dest_phys_address The physical point of attachment to the
subnetwork. This will be a X.121 address for
X.25 or a MAC address for 802.3/FDDI
subnets.
is_phys_addr dest_phys_address The physical point of attachment to the
subnetwork. This will be a X.121 address for
X.25 or a MAC address for 802.3/FDDI
subnets.