OSI Troubleshooting Guide, May 1997

88 Chapter 3
Using OSI and OTS Tools
Dynamic Routing Commands
Table 3-4 ES/IS Command Options
Option Description
-r Reverse Charge Request off. Specifying this option prohibits outgoing calls
from requesting reverse charging. This is the default.
-R Reverse Charge Request on. Specifying this option makes outgoing calls
request reverse charging.
-xN X.25 level of service. N=[0-3].
0 is X.25 ISO 8878
1 is X.25/ 1980
2 is X.25/ 1984
3 is X.25/ 1988
Specifying this option turns off support for the service specified by N. The
default is to have all possible levels of service supported. Only those levels
supported by the subnetwork are valid. See the file ots_subnets for related
parameters.
-XN X.25 level of service. N=[0-3].
0 is X.25 ISO 8878
1 is X.25/ 1980
2 is X.25/ 1984
3 is X.25/ 1988
Specifying this option turns on support for the service specified by N. The
default is to have all possible levels of service supported. Only those levels
supported by the subnetwork are valid. See the file ots_subnets for related
parameters.
-f Flow control off. Specifying this option disallows flow control parameters
(packet size/window size) to be negotiated. This is the default.
-F Flow control on. Specifying this option allows flow control parameters
(packet size/window size) to be negotiated.