HP-UX 11i v3 Installation and Update Guide, September 2010

Table A-1 Messages you can ignore (continued)
Message/actionWhen/where seen
*[902] Running "preinstall" script for fileset
"VRTSob.VEAS-FILESET".
- [902] kill: 1944: The specified process
does not exist.
*[367] Running "preinstall" script for fileset
"VRTSob.VEAS-FILESET
succeeded with 1 warning.
*[1394] Installing fileset
"VRTSob.VEAS-FILESET,r=3.3.837.0"
(841 of 1062).
What to do
You can safely ignore this message. Installation is not affected. VRTSob will start
without any problem once the update is complete.
While updating from a previous
OEUR to the HP-UX 11i v3
September 2008 OEUR and
beyond, the following messages
regarding VRTSob might be
logged onto the console:
/sbin/rc[14]: /sbin/rc2.d/S700vxatd: not found.
What to do
You can safely ignore this message. Installation is not affected. Veritas
Authentication Service (VRTSat) will start without any problem once the update
is complete.
While updating from a previous
OEUR to the HP-UX 11i v3
September 2008 OEUR and
beyond, the following message
regarding VRTSat might be
logged onto the console:
VxVM sysboot INFO V-5-2-3390 Starting restore
daemon... VxVM vxdmpadm ERROR V-5-1-684 IPC
failure: Configuration daemon is not accessible
VxVM sysboot INFO V-5-2-3811 Starting in boot mode...
What to do
You can safely ignore this message. The update and reboot will be successful,
and there will be no functionality impact.
When updating from HP-UX 11i
v2 to HP-UX 11i v3 September
2008 and beyond, the following
error message is logged to the
console on the final reboot:
cp: cannot access /.secure/etc/*: No such file
or directory
What to do
You can safely ignore this message.
Updating from the HP-UX 11i v2
release to the HP-UX 11i v3
release might cause the
following error to appear in the
swagent.log:
Messages you can ignore 77