Softreboot White Paper (5900-2577, March 2013)

B Messages During SoftReboot
Diagnostics and Driver messages during SoftReboot
During a SoftReboot the user may notice warnings or errors from the diagnostics
and other I/O drivers. These messages are safe and do not affect the behavior of
the next kernel booted.
A typical set of messages from diagnostics driver is as follows:
The diagnostic logging facility has started receiving excessive errors from the I/O
subsystem. Until the cause of the excessive I/O logging is corrected, I/O error
entries will be lost.
If the diaglogd daemon is not active, use the Daemon Startup command
in stm to start it
If the diaglogd daemon is active, use the logtool utility in stm
A typical I/O driver status messages as follows:
0/0/9/1/0: Fibre Channel Driver Received Remove Request.
0/0/9/1/0: Fibre Channel Driver has been Successfully Removed.
0/0/9/1/1: Fibre Channel Driver Received Suspend Request.
0/0/9/1/1: Fibre Channel Driver has been Successfully Suspended.
13