Installation of VxFS and VxVM 5.1 SP1 on HP-UX 11i v3 March 2011 Operating Environment Update Release Whitepaper (April 2011)

# /opt/ignite/bin/instl_adm –T –f <VX_config_filename>_cfg
4. Combine both configuration files into one Ignite-UX INDEX configuration
clause:
a. # vi /var/opt/ignite/INDEX
b. Append a new configuration clause, such as:
cfg “HP-UX B.11.31_Mar2011_OE-Vx51” {
description “B.11.31_Mar2011_OE-Vx51 – 2 depots”
“/opt/ignite/data/Rel_B.11.31/config”
“/var/opt/ignite/data/Rel_B.11.31/<0E_config_filename>_cfg"
“/var/opt/ignite/data/Rel_B.11.31/<VX_config_filename>_cfg"
“/opt/ignite/data/Rel_B.11.31/hw_patches_cfg”
“/var/opt/ignite/config.local"
}
c. Test all the configuration files in the INDEX file.
# /opt/ignite/bin/instl_adm –T
5. If you plan to LAN boot the client, add its boot entry in the appropriate file
on the server. This step is not required if you plan to initiate the cold-install
from the Ignite-UX server and the client is up.
a. For an Intel® Itanium®-based client:
1. # vi /etc/bootptab
2. Upate the System-IPF entry with client_hostname and other relevant
values.
b. For a PA-RISC client:
1. # vi /etc/opt/ignite/instl_boottab
2. Append an entry for the client using the following format:
<client_IP_addr>:<client_MAC_addr>::reserve # <client_hostname>
Cold-Installing the client
To cold-install the client, complete the following steps:
1. Boot the client, whose hardware supports B.11.31. For a list of supported
systems, see the HP-UX 11i v3 Release Notes.
To locate this document go to the following location on the HP Business
Support Center:
http://www.hp.com/go/hpux-core-docs