VERITAS 4.1 Installation Guide (June 2006)

Installing Base-VXFS 4.1, Base-VXVM 4.1

Installing Base-VXVM 4.1 on a System with LVM Volume Groups

Chapter 3 27

* Software selections:

B9116BA,r=4.1.002,a=HP-UX_B.11.23_IA/PA,v=HP

+Networking.NET2-KRN,l=/,r=B.11.23,a=HP-UX_B.11.23_IA/PA,v=HP,fr=B.11.23,fa=HP-UX_B.11.23_

+OS-Core.C-KRN,l=/,r=B.11.23,a=HP-UX_B.11.23_IA/PA,v=HP,fr=B.11.23,fa=HP-UX_B.11.23_IA

+OS-Core.CORE-KRN,l=/,r=B.11.23,a=HP-UX_B.11.23_IA/PA,v=HP,fr=B.11.23,fa=HP-UX_B.11.23_IA/

+OS-Core.CORE2-KRN,l=/,r=B.11.23,a=HP-UX_B.11.23_IA/PA,v=HP,fr=B.11.23,fa=HP-UX_B.11.23_IA

+OS-Core.KERN-RUN,l=/,r=B.11.23,a=HP-UX_B.11.23_IA/PA,v=HP,fr=B.11.23,fa=HP-UX_B.11.23_IA/

* Verification succeeded.

NOTE: More information may be found in the agent logfile using the

command "swjob -a log <servername>:/".

======= 08/24/05 16:47:07 IST END swverify SESSION (non-interactive)

(jobid=<servername>)

Installing Base-VXVM 4.1 on a System with LVM Volume

Groups

Before installing Base-VXVM on a system with LVM Volume Groups, complete the following

procedure:

Step 1. To migrate LVM volume groups to VxVM disk groups, run the following command:

# vxvmconvert

Step 2. To enable a VxVM rootable system and to clone the LVM-based root disk to a VxVM

root disk, run the following command:

# vxcp_lvmroot

Step 3. To move disks under LVM control to VxVM control, complete the following

procedure:

a. To remove the disk from any LVM volume groups, run the following command:

# vgreduce